Key Features

  • Ultra Thin Design
  • Touch Sensative
  • Brightness Adjustable, 0.1% Brightness Dimming Precision
  • Static & Dynamic Modes (Cycle Betweeb Colours)
  • No Wiring
  • No Pairing Required

£19.74 Each

SKU: RGB-REC Categories: , Tags: , ,

Description

This wireless RGB controller uses a 2.4Ghz RG signal to controll and 12-24v RGB Strip and comes with a wall mountable holder.

No pairing is required as the controller and receiver are matched before they leave the factory.

Use the touch sensative controller to choose your desired colour from the colour wheel, turn your strip on and off, adjust brightness without the need of a dimmable driver orswitch between static or dynamic modes.

 

Sleep Mode

When the touch remote is unattended for over 20 seconds, it can automatically enter standby mode to extend the battery life. Press any key more than half a second to wake it up.

Manual Pairing

The receiver has been matched to the remotes Group 1 in the factory.

Press the “Group X (X=1,2,3)” button for 2 seconds within 6 seconds of when the receiver is powered up, the output LED light will flash 3 times. This means that the remote is now matched to the receiver succesffuly.

Unpairing

Press the “Group X (X=1,2,3)” button for 2 seconds within 6 seconds of when the receiver is powered up, the output LED light will flash 3 times. This means that the remote is now matched to the receiver succesffuly.

Specifications

Receiver Parameters

Working Temperature: -20°C ~ 60°C
Input Voltage: DC12V-DC24V
Output Channel: 3CH
Total Output Current: 12A (4Ax3CH
Output Power: 12V<144W, 24V<288W
Static Power: <1W
Dimensions: L85 X W45 X H23 (mm)
Weight (N.W): 88g

 

Remote Parameters

Working Voltage: 3V
Working Frequency:
2.4GHz
Working Temp: -20°C ~ 60°C
Dimensions: L108 x W63 x H14 (mm)
Weight(N.W): 40g
Connection Mode: Common anode
Control Distance: 30m
Battery: 1 x CR2032 (Included)