Key Features

  • Supplied per metre
  • 120 High Brightness SMD2835 LED/s Per Metre
  • 3M Self-Adhesive Tape For Easy Installation
  • 15cm Pre-Wired Tails
  • Maximum Run Length: 10m
  • High CRI90
  • Single Binning
  • <5 SDCM (5 Step MacAdam)


£7.43 Per Metre

SKU: TAPE120-1210-3K-20-CUT Categories: , Tags: , , , , , , , , ,


LED strip supplied per metre. Using 120 LEDs per metre this strip offers a beautiful linear lighting effect with minimal dotting.


With cutting points every 25mm making it is easier to match your desired length with no blind spots.

With a genuine 3M self-adhesive tape on the back, it can be stuck to almost any clean smooth surface for easy installation, although while LED strip can be mounted directly to most surfaces it is always recommended that it be mounted in an aluminium profile for optimal efficiency, lifespan & heat dissipation.

Only 8mm wide, it can fit into most aluminium extrusions with a range of solder-free quick connectors available.

Our strips deliver an exceptional light using a colour rendering index of CRI90+ allowing higher definition by replicating natural sunlight better.

Built To Last

Using a robust double layer 2oz Pure Copper PCB for extra-high durability.

Produced using single binning, meaning each chip is checked for colour consistency.

Conforms to a 5 Step MacAdam ellipses so that there is little deterioration over time with no yellowing.

*Please note a 12v LED driver is required to power this strip, see tab above for our recommended driver options

SMD 2835 LED lights are highly efficient, they require less wattage and produce 20% more light output than their predecessor SMD 5050. This makes these LED lights a great choice for lighting both large scale and small projects in both indoor and outdoor applications. They can be used for DIY lighting at home illuminating stairways, walkways, kitchen units. They are also the perfect decorative lighting for such things as festivals, events, shows, and exhibitions. Their convenient size makes them suitable for general lighting, task lighting, and architectural lighting in offices, hospitals, hotels, and more. With their ultra-slim width, 2835 LED lights can be used for cove lighting, sign lighting, bar top lighting, accent lighting, club Lighting, TV backlighting, and more.


Colour Temperature: 3000K
Voltage: 12V DC
Power: 10W/M
Lumens: 910LM/M
Efficacy: 91LM/W
IP Rating: IP20
PCB Width: 8MM
Beam Angle: 120°
Cut Point: 25MM

(adding a 10% tolerance will allow longer life from the driver)

Length: Recommended Driver:
1 Mtr 15w or higher
2 Mtrs 25w or higher
3 Mtrs 35w or higher
4 Mtrs 45w or higher
5 Mtrs 55w or higher
6 Mtrs 70w or higher
7 Mtrs 80w or higher
8 Mtrs 90w or higher
9 Mtrs 100w or higher
10 Mtrs 150w or higher



Technical Data Sheet
LED Tape Structure
Installation Guide
Production Information